SCHURTER presents the new waterproof IEC appliance inlet type 4761 and rewireable cord connector type 4762. The set is rated IP67 when connected or IP69K unconnected, when used with the accessory covers. This appliance coupler is perfect for supplying power to appliances used in harsh environments such as industrial, marine, laboratories or any type of outdoor appliances.
The push/pull locking system of the connector set provides a strong reliable connection; it also features a break-away cable in the event of overdue stress. The blue shape and color of the pull-out mechanism indicates the pull-out direction. A clear catch sound is heard upon the seated connection. The connector style is similar to the international standards of IEC and UL/CSA 60320, but is distinguished by a special arrangement of the contacts, so as not to interchange with conventional power cords. This ensures the maximum power applied, IP protection and the cord retention. The connector can be temporarily submerged in water and can be cleaned with high-pressure hot water cleaners. Both components are very easy to terminate. The inlet is available with solder or quick-connect terminals. The connector is equipped with conventional screw terminals, as commonly seen in rewireable connector designs. Thus, no special tools for wire assembly are necessary.
The appliance couplers are available in black and white. The dual components, appliance inlet and cord connector, can be ordered as complete sets, which simplifies the ordering process and customer logistics. The inlet and connector are also available as individual components for separate inventorying. Accessory covers are available for both plug parts, providing a waterproof protection IP69K in an unplugged state. These protective covers also offer protection against pollutants, which can potentially contaminate the contacts.
The waterproof appliance coupler set is VDE and UL/CSA approved according to IEC/UL 60320. The component level approvals simplify the process for the equipment manufacturer to obtain approval of their appliances. The rated current is according to IEC 10 A @ 250 VAC, according to UL/CSA 15 A @ 250 VAC. The maximum operating temperature is +120 °C. Quick connect terminal options for the inlet: 4.8 x 0.8 mm, 6.3 x 0.8 mm or solder. The cord connector can be assembled with cables from 6.0 - 10.0 mm, maximum wire size acc. to IEC 1.0 mm2, according to UL/CSA 14AWG (2.08 mm2).