We have been supplying parts for production since 1970. Here's our range of electronic components and hardware by brands and categories. Also included is information on Quality Assurance, Environmental Standards, and Elemental Analysis.

American Bright

• LED Assemblies
• LED Displays
• LED Lighting
• LEDs
• Light Engines & Panels

 

APM Hexseal

• Circuit Breaker Boots
• Self-Sealing Fasteners
• Switch Boots

 

Cambion

• IC Sockets
• Inductors & Chokes
• Jumpers
• Solder Lugs
• Test Jacks
• Test Points & Turrets

 

CIT

• Circuit Breakers
• Relays
• Switches

 

Cooltron

• AC Blowers
• AC Fans
• DC Blowers
• DC Fans
• Fan Cords
• Fan Filters, Guards & Hardware
• Heat Sinks

 

Electronic Hardware Corporation

• Control Handwheels
• Knobs: Ball, Clamp, Control, Military & Transilluminated
• Handles: Bridge, Clamping, Crank, Ledge, Leverage, Tapered
• Index Plungers
• Leveling Feet

 

Essentra Components

• Bumpers, Feet & Motion Control
• Bushings & Grommets
• Cable Ties
• Case Hardware
• Clamps & Clips
• Cordgrips
• Fiber Management
• Insulating Hardware
• LED Mounts & Hardware
• Motion Control
• Nylon & Plastic Hardware
• PCB Hardware
• Spacers & Stand-offs
• Wiring Protection

 

General Devices

• Cabinets & Racks
• Equipment Slides

 

HellermannTyton

• Cable Ties
• Cabinets & Racks
• Clamps & Clips
• Electrical Tape
• Label Printers
• Labels
• Surface Raceways
• Tools & Applicators
• Wiring Duct
• Wiring Protection

 

Heyco

• Bumpers & Motion Control
• Bushings & Grommets
• Cable Ties
• Clamps & Clips
• Cordgrips
• Fan Guards & Hardware
• Hole & Vent Plugs
• LED Mounts & Hardware
• Liquid-Tight Conduit
• Liquid-Tight Fittings
• Liquid-Tight Tubing
• Nylon & Plastic Hardware
• PCB Hardware
• Rivets
• Screw Terminals
• Spacers & Stand-offs
• Strain Relief Bushings
• Terminal Blocks
• Wiring Protection

 

Jergens

• Handles & Ferrules
• Hand-Wheels & Knobs
• Locating Components
• Nuts
• Pins: Detent, Dowel, Cotter, Kwik-Lok & Spring
• Screws, Machine, Jack, Shoulder, Panel
• Washers
• Work-Holding Components

 

Keystone Electronics

• Battery Clips, Contacts & Holders
• Fuse Clips & Holders
• Handles & Ferrules
• Hand-Wheels & Knobs
• IDC Connectors
• LED Spacers & Lens Caps
• Metal Keypad Dome Switches
• Multi-Purpose Hardware
• Panel Hardware
• PCB Hardware
• Plugs, Pins, Jacks & Sockets
• Quick-Fit Terminals
• Screw Terminals & Terminal Blocks
• Screws
• Spacers & Stand-offs
• Terminals & Terminal Boards
• Terminal Blocks
• Terminal Boards & Strips
• Test Jacks & Tips
• Test Points, Tips, Probes, Jumpers & Clips

 

King-Cord

• Power Cords

 

Kyocera Displays

• LCD Displays
• Touch Panels

 

Mesan

• Gaskets
• Handles
• Hinges
• Locks & Latches

 

Mornsun

• AC/DC Switchers
• Communication Interface Modules
• DC/DC Converters
• EMC Modules
• IGBT Drivers
• Isolation Amplifiers
• LED Drivers

 

Oupiin

• Audio & Phono Connectors
• BNC Connectors
• Board to Board Connectors
• DIN 41612
• D-Sub, SCSI & Centronic
• FFC/FPC Connectors & Cables
• Futurebus+ Connectors
• Hard Metric Connectors
• Headers
• IC & PLCC Socket
• Modular Plugs
• SIM & Memory Card Connectors
• Sockets
• Terminal Blocks
• Tools & Applicators
• USB & IEEE 1394 Connectors
• Wire Harnesses
  
  
  

 

PEM® Fasteners

• Cable Tie Mounts
• Hooks, Self-Clinching
• Nuts, Self-Clinching
• Panel Screws
• PCB Hardware
• Pins, Self Clinching
• Spacers, Self-Clinching
• Standoffs, Self-Clinching
• Studs, Self-Clinching

 

RAF Electronic Hardware Inc.

• Handles & Ferrules
• Insulating Hardware
• PCB Hardware
• Screws, Machine, Jack, Shoulder, Panel
• Spacers & Stand-offs

 

SI®

• Threaded Inserts for Plastic

 

Seiko Instruments

• Kiosk Printers
• Mobile Printers
• Panel Mount Printers
• Printer Mechanisms

 

Semitec

• Current Regulative Diode
• Gas Tube Arrestors
• Temperature Sensors
• Thermistors
• Transient Voltage Suppressors
• Varistors

 

SunLED

• Displays, Bar Graph
• Displays, Dot Matrix
• Displays, Segment
• LED Assemblies
• LED Light Strips
• LEDs, Infrared
• LEDs, Surface Mount
• LEDs, Through-Hole

 

TEWA Electronics

• Temperature Sensors
• Thermistors

 

Product Groups and Categories

Connectors & Cables

• Alligator Clips
• Audio & Phono Connectors
• Banana Plugs & Jacks
• Binding Posts
• BNC Connectors
• Board to Board Connectors
• Crimp Terminals
• DIN 41612
• D-Sub, SCSI & Centronic
• FFC/FPC Connectors & Cables
• Futurebus+
• Hard Metric
• Headers
• IC & PLCC Socket
• Jumpers
• Micro Pins & Jacks
• Modular Plugs
• Quick-Fit Terminals
• Screw Terminals
• SIM & Memory Card Connectors
• Sockets
• Solder Lugs
• Terminal Blocks
• Terminal Boards & Strips
• Test Jacks & Tips
• Test Points & Turrets
• Tools & Applicators
• USB & IEEE 1394 Connectors

 

Fans, Heat Sinks & Thermal Management

• AC Blowers
• AC Fans
• DC Blowers
• DC Fans
• Fan Cords
• Fan Filters, Guards & Hardware
• Forced Convection Coolers
• Heat Sink Extrusions
• Heat Sinks for LEDs
• Impellers

 

Mechanical Hardware & Enclosures

• Brackets
• Bumpers, Feet & Motion Control
• Bushings & Grommets
• Cabinets & Racks
• Case Hardware
• Equipment Slides
• Gaskets
• Handles & Ferrules
• Hand-Wheels & Knobs
• Hinges
• Hole & Vent Plugs
• Hooks, Self Clinching
• Insulating Hardware
• Locating Components
• Locks & Latches
• Nuts
• Nuts, Self-Clinching
• Nylon & Plastic Hardware
• PCB Hardware
• Panel Screws
• Pins: Detent, Dowel, Cotter, Kwik-Lok, Self-Clinching, & Spring
• Retaining Rings
• Rivets & Eyelets
• Screws, Machine, Jack, Shoulder, Panel
• Spacers & Stand-offs
• Studs, Self-Clinching
• Washers
• Work-Holding Components

 

Optoelectronics & Displays

• Displays, Bar Graph
• Displays, Dot Matrix
• Displays, Segment
• Lamps & Indicators
• LCD Displays
• LED Assemblies
• LED Lighting
• LED Light Strips
• LED Mounts & Hardware
• LEDs, Infrared
• LEDs, Surface Mount
• LEDs, Through-Hole
• Light Engines & Panels

 

Power Products

• AC/DC Switchers
• Batteries & Packs
• Battery Chargers
• Battery Clips, Contacts & Holders
• Current & Voltage Monitors
• Current Regulative Diode
• DC/DC Converters
• Inductors, Chokes & Beads
• Inverters
• LED Drivers
• Medical Power
• Power Cords, International
• Power Cords, Jumper
• Power Cords, Medical
• Power Cords, North American
• Power Sources
• Transformers

 

Printers & Labeling

• Kiosk Printers
• Label Printers
• Labels
• Mobile Printers
• Panel Mount Printers
• Printer Mechanisms

 

Protection & Sensing

Circuit Breakers

Fuse Clips & Holders

Switch Boots

Temperature Probes

Thermistors, NTC

Varistors

 

Switches & Relays

• Relay Sockets
• Relays, Automotive
• Relays, UL Approved
• Switches, Detector
• Switches, DIP
• Switches, Key
• Switches, Metal/Anti-Vandal
• Switches, Micro
•  Switches, Panel
• Switches, Printmount
• Switches, Public Transport
• Switches, Pushbutton
• Switches, Rocker
• Switches, Slide
• Switches, SMT
• Switches, Tactile
• Switches, Toggle

 

Wire Management

• Cable Tie Mounts
• Cable Ties
• Clamps & Clips
• Cordgrips
• Electrical Tape
• Fibre Management
• Liquid-Tight Conduit
• Liquid-Tight Fittings
• Liquid-Tight Tubing
• Strain Relief Bushings
• Surface Raceways
• Wiring Duct
• Wiring Protection

 

Quality Assurance

Our in-house inspection laboratory uses state-of-the-art equipment and a dedicated inspection team to ensure products meet industry standards,  specifications and customer requirements, including dimensions, hardness and plating.

Environmental Standards

RoHS, REACH, and other related environmental standards are expanding in scope, and a non-compliance ruling can be a financial and legal nightmare. Relying on certificates of compliance alone may not be accepted as adequate evidence of conformity. Most of the directives will require the demonstration of adequate due diligence to ensure that applicable standards are being met.

Elemental Analysis

IRWIN Industrial uses X-ray Fluorescence Spectrometer technology to facilitate the analysis of multiple materials and coatings for restricted substances. X-ray Fluorescence Spectrometry is accepted as the best first-level, non-destructive screening method available.

We can ensure that your components - from connectors to heat sinks to 1¢ screws - are compliant, so that your product will withstand the scrutiny of compliance enforcement activity.