IRWIN Fastener Line Card
A Raymond Page
APM Hexseal Page
Atlas Page
Essentra Page
HellermannTyton Page
Heyco Page
IRWIN Environmental Compliance
Jergens Page
Lanfranco Page
Line Card pdf
Mesan Article
ND Page
PEM Page
RAF Page
SI Page
IRWIN Fastener Line Card

We have been supplying fasteners for production since 1970. Here's our range by categories and brands. Also included is information on Pre-Applied Materials for Fasteners, Procurement Services,  Quality Assurance, Environmental Standards, and Elemental Analysis.

Irwin Bolts & Studs

Bolts & Studs

  • ASTM A193 B7, B8 Class 1&2, B8M Class 1&2
  • Bolt Retainers
  • Carriage Bolts
  • Eye Bolts
  • Hex Flange 12-Point
  • High Strength Structural Bolting
  • Lag Bolts
  • Large Diameter - To 3-1/2" / M64
  • Plow Bolts
  • Rod Ends
  • Square Head
  • Studs, Self-Clinching
  • Track Bolts


Clips, Clamps & Ties

Clips, Clamps & Ties

  • Cable Clamps
  • Cable Tie Mounts
  • Cable Ties
  • Hooks, Self-Clinching
  • Panel Clips
  • Trim Clips
  • U, J and S Clips


 Machine & Tapping Screws

Machine & Tapping Screws

  • Miniature
  • Nylon, Stainless, Brass
  • Pan, Truss, Flat, Hex, Hex Washer Head, Oval
  • Screws for Plastics
  • Self-Drilling Screws
  • Self-Sealing Screws
  • Sems
  • Shoulder Screws
  • Thread Cutting
  • Thread Forming - for Die Cast
  • Thread Forming - for Metal
  • Thread Forming - for Plastic
  • Thread Forming - for Thin Sheets
  • Wing Screws

Machine Screw Drives

 Nuts

Nuts

  • Acorn Nuts
  • All-Metal Locknut
  • ASTM A194 2H, 2HM; Grade 7,8,8M
  • Cap Nuts
  • Chassis Fasteners
  • Coupling Nuts
  • Expansion Nuts
  • Grade 2, 5, 8; Class 8.8, 10.9, 12.9
  • Hex Flange & Serrated Flange
  • Threaded Inserts
  • Keps, Conical Washer Nuts
  • Machine Screw Nuts
  • Nylon Insert Locknuts
  • Nylon, Stainless, Brass, Exotic Alloys
  • PalNuts®
  • Push Nuts
  • Nut Retainers
  • Rivet Nuts
  • Security Nuts
  • Self-Clinching Nuts
  • Slotted Nuts
  • Speed Nuts
  • Flat, Bracket, J, U
  • Square Nuts
  • Weld Nuts
  • Wheel Nuts
  • Wing Nuts


 Panel & Case Hardware

Panel & Case Hardware

  • Bushings & Grommets
  • Catches and Strikes
  • Conduit Fittings
  • Cordgrips
  • Handles
  • Hole Plugs
  • Jack Screws
  • Latches
  • Magnets
  • Panel Screws
  • Quick Access Fasteners


 Pins

Pins

  • Barbed Push Pins
  • Clevis & Cotter Pins
  • Dowel, Pull Dowel
  • Groove
  • Hairpin
  • Plungers
  • Quick-Release Pins
  • Self-Cliching Pins
  • Spiral Groove
  • Spring Plungers
  • Taper


Socket & Hex Cap Screws 

Socket & Hex Cap Screws

  • Button Head Cap Screws
  • Flat Head Socket Cap Screws
  • Grade 2, 5, 8;  Class 8.8, 10.9, 12.9
  • Heavy Hex
  • Socket Cap Screws - Alloy
  • Socket Pipe Plugs
  • Socket Set Screws
  • Socket Shoulder Screws
  • Stainless


 Spacers & Standoffs

Spacers & Standoffs

  • Circuit Board Supports
  • Female Standoffs
  • Male-Female Standoffs
  • Male-Male Standoffs
  • Self-Cliching Spacers
  • Self-Clinching Standoffs
  • Spacers
  • Swage Standoffs


 Washers

Washers

  • Belleville Washers
  • Beveled Washers
  • Disc-Lock® Style
  • Fender Washers
  • Flat Washers
  • Hardened Washers
  • Nylon, Stainless, Brass, Exotic Alloys
  • Retaining Rings
  • Sealing Washers
  • Shoulder Washers
  • Split Lock Washers
  • Spring Washers
  • Structural Washers
  • Toothed Lock Washers

 

Design Support

IRWIN is your one-stop resource center for quick and easy access to the latest in new products and technical documents from our key supply partners.

We also routinely provide on-site design support to our clients, in collaboration with our suppliers' field application engineers, as well as liberal sampling to get you through your prototype and pilot build gates efficiently.

Put us to the challenge - you will be pleased with the results.


 ND Industries

Pre-Applied Materials for Fasteners

IRWIN offers innovative solutions from ND Industries for application to many of our threaded fasteners. Pre-applied materials increase fastener performance, reduce parts-count, speed assembly, extend product-life and ensure consistency.

INERT THREAD LOCKING

Also known as prevailing torque, this process uses a mechanical force to create a secure lock that is resistant to vibration, shock, and related slippage. The fastener can typically be removed and reused.

REACTIVE THREAD LOCKING

Once installed into a mating part, a strong chemical bond is formed, preventing slippage from shock and vibration while helping to seal fastening points against gas and liquid leakage.

MASKING & LUBRICATING

Formulated to ease the assembly process and to protect fastening parts against exposure to undesirable substances that can adhere to uncoated fasteners.

ASSEMBLY AIDS

Designed to make assembly safer, easier and faster by reducing application errors and worker fatigue.

ADVANCED SEALING

ND pre-applied sealants are designed to withstand a wide range of pressures, chemical fluids and gases while reducing the chance of a fastener loosening.

Procurement Services

Whether you need help with a first time / one time buy from a new vendor for a flat dollar amount fee, or you need us to manage a portion of your supplier community on an ongoing basis for a small percentage of the invoice value, we have the resources and business process to support the cause.

Which of these can you relate to?

Scenario 1

You need to make a rush purchase from a vendor with whom you have never dealt. It could be for a penny part or a 'class A' item, from anywhere on the globe. It takes you days to get a new vendor entity pushed through channels and set up in your system so you can issue a PO - by which time you are expected to have the part on your dock.

Scenario 2

You have a highly fragmented vendor base, and just too many transactions and suppliers to manage given the resources at your disposal. Things are slipping through the cracks. Another body in your department is not an option.

Our customers have been faced with these scenarios and we have answered the call with our fee-based procurement services.

Nimble response and flawless execution at a reasonable cost.

APM Hexseal 

APM Hexseal

  • Self-Sealing Fasteners


 ARaymond

ARaymond

  • Cable Clamps
  • Cable Clips
  • Cable Ties
  • Cap Nuts
  • Expansion Nuts
  • PalNuts®
  • Panel Clips
  • Push Nuts
  • Speed Grips
  • Speed Nuts
  • Flat, Bracket, J, U
  • Trim Clips
  • U-Nuts


 Atlas

Atlas®

  • Blind Threaded Inserts


Essentra Components 

Essentra

  • Barbed Push Pins
  • Bushings & Grommets
  • Cable Clamps
  • Cable Clips
  • Cable Tie Mounts
  • Cable Ties
  • Circuit Board Supports
  • Cordgrips
  • Hole Plugs
  • Machine Screws, Nylon
  • Nuts, Nylon
  • Washers, Nylon


 HellermannTyton

HellermannTyton

  • Cable Clamps
  • Cable Clips
  • Cable Tie Mounts
  • Cable Ties


 Heyco

Heyco

  • Bushings & Grommets
  • Cable Clamps
  • Cable Clips
  • Cable Ties
  • Circuit Board Supports
  • Conduit Fittings
  • Cordgrips
  • Hole Plugs
  • Sealing Washers


J.Lanfranco 

J.Lanfranco

  • All-Metal Locknuts


 Jergens Specialty Fasteners

Jergens

  • All-Metal Locknuts
  • Clevis & Cotter Pins
  • Coupling Nuts
  • Handles
  • Hardened Washers
  • Pull Dowel Pins
  • Quick-Release Pins
  • Rod Ends
  • Spring Plungers
  • Threaded Inserts


 Mesan Access Hardware

Mesan

  • Gaskets
  • Handles
  • Hinges
  • Locks & Latches


 PEM Fasteners

PEM® Fasteners

  • Cable Tie Mounts
  • Hooks, Self-Clinching
  • Nuts, Self-Clinching
  • Panel Screws
  • PCB Hardware
  • Pins, Self Clinching
  • Spacers, Self-Cliching
  • Standoffs, Self-Clinching
  • Studs, Self-Clinching


 RAF Electronic Hardware

RAF

  • Chassis Fasteners
  • Circuit Board Supports
  • Female Standoffs
  • Handles
  • Jack Screws
  • Male-Female Standoffs
  • Male-Male Standoffs
  • Panel Screws
  • Shoulder Screws
  • Spacers
  • Swage Standoffs


 SI Fasteners fo Plastics

SI®

  • Threaded Inserts for Plastic

 

Quality Assurance

Our in-house inspection laboratory uses state-of-the-art equipment and a dedicated inspection team to ensure products meet industry standards,  specifications and customer requirements, including dimensions, hardness and plating.

IRWIN Quality

Environmental Standards

RoHS, REACH, and other related environmental standards are expanding in scope, and a non-compliance ruling can be a financial and legal nightmare. Relying on certificates of compliance alone may not be accepted as adequate evidence of conformity. Most of the directives will require the demonstration of adequate due diligence to ensure that applicable standards are being met.

Elemental Analysis

IRWIN Industrial uses X-ray Fluorescence Spectrometer technology to facilitate the analysis of multiple materials and coatings for restricted substances. X-ray Fluorescence Spectrometry is accepted as the best first-level, non-destructive screening method available.

Irwin Elemental Analysis

We can ensure that your components - from connectors to heat sinks to 1¢ screws - are compliant, so that your product will withstand the scrutiny of compliance enforcement activity.

To Top