Heyco's Sun Products Catalog for 2016 includes a wide range of all-new products as well as new variations on existing ones, and expanded regulatory approvals.
Request the new 80-page catalog using the "My Request" tab. Download individual catalog pages in the link section.
Here's a summary of the all-new products contained in the 2016 catalog.
Heyco®-Tite Solar Masthead®Metal Liquid Tight Cordgrips
Multi-Hole, NPT Hubs - IP 68 Rated The Ultimate in Liquid Tight Strain Relief Protection
- Break-Thru Skinned-Over glands offer flexiblity to use from 1 to 31 of the available holes while still providing a liquid tight seal around the wire.
- Rolled grease-free threads prevent galling and allow for multiple assemblies and disassemblies.
- Approved for NEMA 4, 4X, 6 and 6P applications.
- Self-retaining sealing rings eliminate the need for an O-Ring groove, thus reducing cost.
- Stainless Steel ideal for corrosive environments.
- Aluminum a less costly solution for robust environments.
- Provide a watertight seal for PV module output leads to inverters.
- Secure input PV leads from solar panel array strings to fuse holder hookup within solar combiner boxes.
HEYClip™ Stainless Steel SunRunner® 90° Double-Wire Cable Clips
Accommodates two cables from 0.20˝ (5,1 mm) to 0.30˝ (7,6 mm). Double-Compression, Right Angle Design
- Smooth clip edges prevent damage to cable insulation.
- For PV modules mounted in the “landscape” mode. PV modules with shorter than normal junction box cables cannot be dressed out to the sides of the module.
- The SunRunner 90° will allow the junction box cables to be run to the adjacent modules across the short side of the PV module frame.
HEYClip™ Stainless Steel SunRunner® 2-S Series Cable Clips
For Rail-less Systems
- Designed to hold Micro-Inverter Cables 0.413˝ (10,5 mm) to 0.472˝ (12,0 mm) and Module Cables up to .300˝ (7,6 mm) in diameter for rail-less mounting systems.
- Constructed from heat treated 410 stainless steel for excellent strength and corrosion protection for outdoor exposure.
- Smooth clip edges prevent damage to cable installation.
- Designed for panel and cable retention up to 15 lbs.
- Neatly dress cables on PV panels or module frames from .050˝ (1,3 mm) to 0.250˝ (6,4 mm) thick.
HEYClip™ SunRunner® CT Cable Tie Mounting Platforms
Stainless Steel Edge Clip
- Designed to easily mount to module or frame extrusions without the need for mounting holes or adhesives.
- Designed to be used with Heyco Stainless Steel Cable Ties up to 0.31˝ (8,0 mm) width or Heyco SunBundler Stainless Steel Wire Cable Ties.
- Hold cable bundles parallel or perpendicular to the mounting frame.
- Generous lead-in for installation without tools.
- Constructed from corrosion resistant 304 stainless steel.
- SunRunner CT-EZ designed for thicker module frames as well as racking systems - accommodates profiles up to 0.250˝ (6,4 mm) thick.
- UL Listed per UL 1565.
HEYClip™ Vinyl Coated Spring Clamps
- Secures round cable, ribbon cable, and tubing.
- Vinyl coating protects and insulates.
- Mounts with a #6 (M3,5) screw, yet cable can be inserted and removed without removing the clip.
Heyco® Nytyes® with Stainless Steel Locking Device
- Metal pawl for high strength and better durability.
- Self-locking head design speeds installation and locks into place at any length along the tie body.
- Provide a strong, durable method of cable bundling.
- Can be used in a wide range of indoor, outdoor, and underground (including direct burial) applications.
- Smooth surfaces and rounded edges assure cable protection and worker safety.
Heyco® Stainless Steel Cable Ties
Ball Lock Stainless Steel Strip Cable Ties - Standard and PVC Coated - now available in marine grade stainless steel (AISI 316)
- Stainless steel cable ties have more strength and better durability than nylon cable ties.
- Locking-ball design for maximum holding strength and ease of installation.
- Coated ties offer additional protection and separation of dissimilar metals for improved corrosion resistance.
- Custom lengths available.
Heyco® Steel Cushion Clamps
- 187" (4.7mm) to 1.25" (31.8mm) dia.
- Light to heavy duty steel clamp.
- P.D.M. cushion for electrical insulation and vibration absorption.
- Steel clamps are zinc electroplated for corrosion resistance.
- Color - Silver with durable black cushion.
Heyco® SunScreener®Wire Mesh Clip
Now available as a kit. 36 pcs of S6437 SunScreen Clips bundled together with one 100' Roll of SunScreen Wire Mesh.
- Helps protect solar panels from rodents and nesting birds with wire mesh screening (included in new kits).
- Constructed from 303 and 304 Stainless Steel for maximum endurance to outdoor elements.
- 303 Stainless Steel J-Hook easily attaches to the solar panel frames and can easily be trimmed or bent after assembly.
- 304 Stainless Steel Washers will firmly hold wire mesh screen to the module assembly.
- Does not violate panel integrity.
- Installs quickly and easily with standard linesman pliers
- Black color available for those applications subject to HOA appearance restrictions.
- Stainless Steel Washers are offered in both steel color and black-painted versions.
Heyco®-Tite Liquid Tight Cordgrips
Split Gland for Pre-assembled Cables with Integral Sealing Ring
- Split Glands are designed for application to the cable after the cable has passed through the LTCG; e.g., RJ45 cable with Cat5e termination.
- Simply pass the cable termination through the LTCG body, apply Split Gland to the cable, and insert the gland/cable assembly into the LTCG fingers. Then tighten the Sealing Nut to achieve a liquid-tight seal.
- Integral Sealing Ring ensures a superior seal at the clearance or threaded mounting hole location, every time.
HEYbrid™ Aluminum Liquid Tight Cordgrips
Straight-Thru, NPT Hubs
- HEYCo-molded gripping finger/gland technology accommodates the widest cable range over the fewest SKUs.
- Rolled grease-free threads prevent galling and allow for multiple assemblies and disassemblies. No messy, unsightly thread lubrication required.
- Approved for NEMA 4, 4X, 6 and 6P.
- Self-retaining sealing rings eliminate the need for an O-Ring groove, thus reducing cost.
- Aluminum construction provides excellent durability and performance for most industrial applications.
- For use in both indoor and outdoor applications to prevent cable pull-out, control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture, and coolants.
- Sealing washer required for through-hole applications only.
HEYbrid™ Stainless Steel Liquid Tight Cordgrips
Straight-Thru, NPT Hubs
- HEYCo-molded gripping finger/gland technology accommodates the widest cable range over the fewest SKUs.
- Rolled grease-free threads prevent galling and allow for multiple assemblies and disassemblies. No messy, unsightly thread lubrication required.
- Approved for NEMA 4, 4X, 6 and 6P.
- Self-retaining sealing rings eliminate the need for an O-Ring groove, thus reducing cost.
- Sealing washer required for through-hole applications only.
- Ideal for corrosive environments.
- Constructed from corrosion resistant 303 stainless steel.
- Resistant to salt water, acids and most chemicals.
- Patent pending.
HEYClean® Brass Pressure Equalization Plugs
- Allow the passage of air for ventilation and heat dissipation, yet prevent moisture intrusion.
- Filter membrane prevents moisture and particulate contamination in electronic enclosures.
- Pressure compensating seal prevents buildup of pressure inside of electronic enclosures due to environmental temperature cycling.
- Quick and easy installation into Clearance or Threaded Holes.
- Nickel-plated finish over brass provides excellent corrosion resistance and durability.
- Head Thickness: .37˝ (9,5 mm) to 0.39˝ (10 mm).
- Hex shaped body for wrench installation.
- Filter element: Liquid Tight Membrane: Polyethersulfone (PES); Sintered Disc: Bronze
HEYClean® Brass Drain Plugs
- Drainage Plugs are ideal for applications where condensation is expected.
- Stainless steel mesh allows water to drain quickly, but protects enclosure from bugs and dust.
- Cutout section to allow water to completely drain from enclosure, and should be installed at enclosure’s lowest point.
- Head Thickness: 0.37˝ (9,5 mm) to 0.39˝ (10 mm).
- Hex shaped body for wrench installation.
- Locknuts available
HEYClip™ Tension Wire Clips - Nylon
- Adhesive-Back Mount
- Gather and direct cables singly or in groups smaller than those accommodated by other Heyco Wire Holders.
Heyco® Nytye® Nylon Cable Ties
- Smooth, radiused edges ensure that Nytyes won’t cut into the cable’s insulation–or the installer’s hand.
- One-piece design reduces cost and installation time.
- Nytyes feature a bent tip for ease of pickup and insertion around small bundles. V-shaped raised ridges on the tip provide a sure grip.
- Close, evenly spaced teeth permit fine adjustment–from .025˝ (0,6 mm) on the smallest Nytyes to 0.063˝(1,6 mm) on the largest..
- Compliant with MS3367 and MIL-S-23190E
Heyco® Continuous Grommet Rolls
- Polyethylene or Nylon in 100' (30.5M) Rolls
- Grommet Strips protect against damage from sharp panel edges.
- Ideal for tight radii or irregular panel holes and cut-outs.
Heyco® Grommet Channel
TPE “DS” Channel - Unserrated, MDS Filled in 48" (122cm) Strips or 100' (30.5 M) Rolls
- This flexible Grommet Channel is ideal for protecting panel edges from being damaged.
- For use as wear strips, non-abrasive edging, noise-reducing conveyor strips, framing, or to protect from sharp edges.
- Good durability; MDS glue filling adheres to rubber, most plastics, wood and metal.
- Features built-in lubricant for reduced friction and longer part life.
Heyco® Grommet Channel
Polystyrene Channel - 48" (122 cm) Lengths
- Binds and frames sharp edges.
- May be cut to desired lengths.
- Available by special order only.
