An extensive list of AC-DC power supplies from 1 to 1,000W

• Enclosed
• Open-Frame
• DIN-Rail
• Encapsulated

Stock at Irwin Calgary to support Alberta Solar

• Cable Clips
• Cordgrips
• Cable Ties - Steel & Nylon

Create snap-action arrays directly on PCBs

• Low-profile & light-weight
• Nickel-plated stainless steel
• Tactile - various forces available
• Three series

Enclosed PSU has 0.99 Power Factor

• 1U Height
• Wide-Range AC & DC Inputs
• Supports 3+1 Redundancy
• Comparable to Mean Well

MIP technology provides ultra-low power consumption with high visibility

• 5-12 micro-watts in static mode
• Built-in SRAM in every pixel
• >24:1 contrast
• >17% reflectance

Rugged large push-button with wide range of options

• IP67-sealed
• Non-illuminated or ring-illumination
• SPDT or DPDT
• Momentary or latching

PCB-mount - in both thru-hole and SMT

• For 5AG Midget fuses
• Available cover
• Up to 30A at 500VDC
• UL-recognized

Tie molded with edge-clip housing speeds installation

• 160 mm length
• 1 to 3 mm panel
• UV-resistant Nylon 6/6
• 94V-2 flammability

Sealed for water & dust protection

• UL recognized
• Quick connect or wire leads
• Lever options
• 10A 250VAC

IRWIN has been the best source for production since 1970

• Standard & Custom
• Elemental Analysis
• Patching & Kitting
• Franchised Brands

Suitable for PV Solar Installations

• 16 lengths from 100 to 710mm
• UV & Low-Temperature Resistant
• Moisture & Corrosion Tolerant
• UL94 HB flammability

Ideal for emergency backup applications

• 50X longer life than incadescent
• 1/10 th energy
• Direct replacement
• Cost Savings

IRWIN has been the best source for production since 1970

• Fans, Heat Sinks & Power
• LEDs, LCDs, & Switches
• PCB & Panel Hardware
• Wire Managment
• Much More...

CASE STUDY

Minimize unplanned shutdowns & increase throughput in very demanding conditions.

2032 holders include switch & lead wires

• Single & Dual Versions
• Polarized
• On/Off Toggle Switch
• Screw-Securable Cover

Comparable to EOS & Meanwell

• 120, 225, 350, 450 and 550W
• Wide-Range AC & DC Inputs
• High Power Density & Efficiency
• Extremely low leakage current <1mA

Allows quick & easy installation and updates to terminated cables

• Polyester Mesh Provides Flexibility
• 9 Sizes: 0.25" to 2" Diameter
• UL 94 V2 Flammability
• -50 to 150 deg C

Standard PEM fasteners mounted into base plates

• Mounts on/or in Composites, Plastics, etc...
• Mold-In, Laminate, or Bond
• Rivet, Anchor, or Weld
• NEW 20mm Base

Automated Restock Alerts Keep Lines Up and Running

• Reduce Order Activity
• Prompt Low-Stock Notifications
• Flexible Configurations
• Supply-Base Consolidation

Mechanical, Electrical & Electronic Components for Demanding Applications

• Access Hardware
• Wire Management
• Self-Clinching Fasteners
• Lighting, Switches, Power Supplies, Indication, Sensors & more

CASE STUDY
Replacing incandescent bulbs with LED technology provides a range of benefits in this critical application.

Eleven Series from Mornsun

• 35 to 350W
• Wide-Range AC & DC Inputs
• Single & Dual Output Models
• Comparable to Meanwell

Strong & reusable permanent threads in plastic

• Ultrasonic, Heat Staking, Molded-In, or Press-In Types
• Imperial & Metric
• Brass, Stainless Steel and Aluminum
• Micro Versions to M1

Strong & reusable permanent threads where only one side is accessible

• Four Types of Fasteners
• Imperial & Metric
• Quick & Easy Installation
• Wide Variety of Installation Tools

Heavy-duty tie base routes cables along rails & frames

• Ratcheting Design - Positive Locking
• No Drilling - Fast Install
• 4-Way Wide Slots
• 3 Models 0 - 13mm Thk

Thread protection for PEM internally threaded fasteners

• Fasteners Prefitted
• Plugs & Film Easily Removed Post-Finishing
• Protection Withstands 250 deg C
• Fasteners Installed with Same Equipment

Modified Thread Angle = Easier Tightening & Better Locking

• Unlimited On/Off Cycles
• Resistant to Vibration
• Standard Mounting Hole
• Speeds & Simplifies Assembly