Nylon Corrugated Conduit and Fittings
90 deg Fitting Specification
Conduit Specification
Heyco Page
Straight Fitting Specification
Nylon Corrugated Conduit and Fittings

Heyco Nylon Corrugated Conduit and Tubing is highly flexible, lightweight, and offers low installed cost.  It is a low fire, smoke, and toxicity hazard, and is halogen, sulphur and phosphorus free. Highly resistant to abrasion, oil and solvents, Heyco Nylon Corrugated Conduit and Tubing has a high fatigue life and impact strength, and recovers if crushed.  It is suitable for use in outdoor locations and can be used with all types of equipment, machinery, pumps, motors, and HVAC equipment. The Conduit and Tubing is made of Polyamide Nylon 6, with a 94V-2 or 94V-0 halogen free flammability rating, 300V voltage rating, and an IP 66 rating when used with Heyco's HPASC fittings. It is recognized under Underwriters' Laboratories file E121095 for both U.S. and Canadian requirements.

  • Low fire hazard
  • Low smoke and toxicity
  •  Halogen, sulphur, and phosphorus free
  • Highly flexible and high fatigue life
  • High impact strength and recovers if crushed
  • Lightweight and low installed cost
  • Use with Heyco Nylon Fittings
  • UV resistant
  • For use with all types of equipment, machinery, pumps, motors, and HVAC equipment
  • 10 mm thru 54 mm nominal sizes
  • Highly resistant to abrasion, oil, and solvents
  • 300V  Voltage Rating
  • Suitable for use in outdoor locations

Heyco Nylon Corrugated Conduit / Tubing
HPAS Series

 

Heyco HPASC Nylon Conduit Fittings are available in Straight-Thru and 90° Sweep Styles to be used with Heyco Nylon Corrugated Conduit and Tubing.  There is no disassembly required as the installer simply pushes the conduit or tubing into the fitting, then tightens the domed sealing nut.  Since no threading of the conduit or tubing is required to install, the possibility of cutting the conduit or tubing and creating leak paths is eliminated.  Made from Nylon 6/6 with silicone rubber glands, these fittings are recognized under the Component Program of Underwriters' Laboratories file E121095 for both U.S. and Canadian requirements.  They have a 94V-2 or 94V-0 flammability rating and are IP 66 rated. 

  • No disassembly required
  • Silicone gland ensures liquid tight seal
  • No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths
  • Multiple sizes available for use with Heyco-Flex Conduit and Tubing.

Heyco Nylon Conduit Fittings - Straight Thru

Heyco Nylon Conduit Fittings - 90-deg Sweep

end

To Top